More electrics, more wood

So, having posted about trying to hodge it with the wrong tools yesterday; today I decided to suck it up and buy a new 90° drill. Not a good quality one, obviously*. I grabbed a Ryobi One tool. Largely because I picked up the Ryobi One impact driver for putting in the bolts that attach the Simpson anchors** to the walls.

I’m glad I got it, although it’s clearly cheap and not going to last a terribly long time. But it does mean, I think for the first time ever, we have a power tool with a battery pack where you can buy the tools and the pack off the shelf. Our Makita drill has an ancient version of the 18v pack (not compatible with the newer ones – it’s several generations behind). The Ridgid stuff is similarly archaic – no packs off the shelf, no new compatible tools.

It’s weird to be able to go into a store and just buy stuff that works with it. Kind of nice, too. I actually picked up a strimmer today (because the grass was getting beyond out of hand – and needed to be cut back from the house (it’s done now)). It came with another battery and charger – so we now have 3 batteries, two chargers and 3 tools that take the same battery. Yay!

Anyhow, the 90° drill is only a baby one and also makes the hot smell and stalls a fair bit trying to cut through the studs. But it is way easier. And less prone to trying to break my wrist, or smack me in the face. Hopefully it’ll survive through the entire wiring experience.

So, with that in hand I ran the rough in for the kitchen. I’m still using up the last of the salvaged wiring, but it’s getting to the point where I’ll need to switch to the new and painfully expensive stuff. I’m still stunned by how expensive materials here. Anyhow. Basically, the far end of the house (longer runs) will be all new cable. Apart from the odd short segment running between outlets. Oh, and I realised that I was a fool, and about to make a dumb mistake. I’d thought about putting each of the two kitchen lights on the two (required) circuits for the kitchen. Of course, that doesn’t work if you want them to be switched on the same switch, which we do. Thankfully I twigged that before I’d run any wire. It was one of those “oh, I could do this” moments, when I should stick with the plan. Stick with the plan Kate, there’s a reason you made it.

/PHOTO_20180503_152947

I also spent a chunk of time today digging through our wood pile to find short bits to make into the diagonal reinforcing bits to go in our 13ft (4m) walls, and then cutting them to length.

/PHOTO_20180503_152819

They will actually sit about half way up the wall – adding some much needed strength to the flexy 13′ lengths of 2×4 – but to avoid them getting confused for anything else I’ve tucked them in the wall and will hopefully get them nailed in on Saturday.

I’ve also cut some of the bits for attaching the ceiling drywall (plasterboard). I’m also optimistically trying to look at plasterboard lifts.

And this weekend we’re thinking about putting windows in. Again, the plan was to do that earlier in the week, but instead it rained and I threw myself off a step. But this weekend looks to be dry and so do the Monday and Tuesday following. So that’ll keep us busy…

* The number of times I’ve broken my rules about buying good quality tools is growing. I’ve still more-or-less stuck to buying good quality drill bits / blades, because they can make a shitty tool into an adequate one.
** These are U shaped bits of metal that hold the house to the foundation – designed for earthquake resistance.

Author: KateE

Kate is lord and mistress of all she surveys at pyoor.org...